Total Solution Provider for Industrial Instrumation
Prog. Instrument - Timer
PTR_01/PTR_03

Introduction
ZEUS presents PTR_0X , a very stable, reliable and optically isolated Timer which has 4 digit Timer which is fully programmable. This can accept different type of inputs like NPN-proximity switch, PNP-proximity switch, infrared sensors, magnetic sensors or contact closers. The different ranges can be programmed with OFF delay/ON delay and this can be used as a cyclic timer (equal time / unequal time).

This timer can be used in different modes like power ON start, start with external trigger, keep start till external trigger is available & it goes off when trigger is removed, Timer stops and it restarts when trigger (input) is available again.

Feature
  1. Fully programmable.
  2. Optically isolated inputs and outputs.
  3. Auto / manual mode available.
  4. Programmable ON delay / OFF delay.
  5. Different type of input can be configured. Cycling Mode possible.
  6. Isolated input (External Trigger)

Application
  1. For all process control application To Control Time Base Application.

SR. Programmable Timers Model No.
01. 4 Digit Programmable Single Timer with Universal Input and 1 Relay Output       PTR_01
02. 4 Digit Programmable Cyclic Timer with Universal Input and 2 Relay Output       PTR_02
03. 4 Digit Programmable Triple Timer with Universal Input and 3 Relay Output       PTR_03

Specification
Product Timer
Model No. PTR_01/PTR_03
Range 9.999 sec, 99.99 sec, 9999 sec, 9.999 min, 99.99 min, 999.9 min, 9999 min, 9.999 hr, 99.99 hr
Sensor Potential free contacts NPN or PNP Proximity, Infra Red Sensor, Contact Closers
Display 7 Segment
Memory Non-volatile Memory
Setting Keyboard
Input Start, Stop, Reset
Control Output 1 Relay 6A, 1 C/O
Function On Delay / Off Delay / Cyclic
Set Point 1
Display Selection Running Time/Set Point
Special Features Cyclic Timer with no. of counts
Multiplier NA
Divider NA
Optically Isolated Inputs Yes
Reset Auto/Maunal
Programmable Decimal Point Yes
Power Down Mode Selectable Yes (On Range Select)
Supply Universal 90V to 260V AC
Humidity 0 to 55 ° C
Working Temperature 0-90%RH(<40 °C) - Non Condensive
Dimension 72x72x120, 48x 96x120,48x48 mm
Cutout 68x68, 44x92, 42x42 mm
Optional -
Product :   Digital Counter, RPM / Speed Indicator, Hourly Counter, Timer / Ejector Timer, 8 Channel Timer and Ratio Meter/ Speed Indicator
Group Products Specification
Product Digital Counter Programmable Counter cum speed indicator Hourly Counter Timer / Ejector Timer 8 Channel Timer Ratio Meter/ Speed Indicator Time Logger
Product Image
Model No. PCR_01 PCR_02 PCR_06 PTR_01/PTR_03 PTR_08 PSI_02/PSI_01 PTRL_04
Range 6 Digit Counter 10 Digit (6 - Counter, 4 - Speed) - 9.999 sec, 99.99 sec, 9999 sec, 9.999 min, 99.99 min, 999.9 min, 9999 min, 9.999 hr, 99.99 hr 0-99.9 Sec 0-1999 rpm OR
1:100 ratio/
0-1999 rpm
4+4 Digit
Sensor Potential Free Contacts, Proximity Switch, Voltage Pulses, Photo Detector, IR Sensor, Magnetic Switch, Encoder, etc. Potential free contacts NPN or PNP Proximity, Infra Red Sensor, Contact Closers Potential Free Contacts, Proximity Switch, Voltage Pulses, Photo Detector, IR Sensor, Magnetic Switch, Encoders, etc. Potential Free Contacts,Proximity Switch
Display 7 Segment LED 16X2 Line LCD Display 7 Segment 16X4 Line LCD 7 Segment LED
Memory Non-volatile Memory No Non-volatile Memory
Speed 1 KHz - - 3 KHz 500 Hz
Setting Keyboard
Input External Trigger, Reset, Stop Start, Stop, Reset Start, Stop Speed 1 and Speed 2/Speed 1 N.A.
Control Output 1 C/O 6 AMP 230 AC Relay 1 Relay 6A, 1 C/O SSR O/P N.A.
Function Auto Reset Type/Count Freeze / Count Advance Type, Alarm/Control O/P(Optional) - On Delay / Off Delay / Cyclic Off Delay Alarm/Control O/P(Optional) Records, On & Off of different Channels with date & Time stamping /td>
Set Point 1 8 1-Feb NA
Display Selection Counts Count/Speed Date/Time/Count Running Time/Set Point Speed 1 OR Speed 2 OR Ratio/Speed Channel Status
Special Features Truck loading control software available - Can Record 30 Days Hourly Production Cyclic Timer with no. of counts 8 Diff. O/ps with Time. It can be Prog. - Online Printing
Multiplier Yes (3 Digit) NA Yes (3 Digit) NA
Divider Yes NA Yes (3 Digit NA
Optically Isolated Inputs Yes
Reset Auto/Maunal Yes Auto/Maunal NA
Programmable Decimal Point Yes NA Yes
(On Range Select)
NA Yes NA
Power Down Mode Selectable Yes - NA
Supply Universal 90V to 260V AC
Humidity 0-90%RH(<40 ° C) - Non Condensive 0 to 55 ° C
Working Temperature 0 to 55 ° C 0-90%RH(<40 ° C) - Non Condensive
Dimension 72x72x120 mm 96x96x120 mm 72x72x120, 48x 96x120,48x48 mm 96x96x120 mm 72x72x120, 96x96x120, 48x48 mm 72x72, 96x96 mm
Cutout 68x68 mm 92x92 mm 68x68, 44x92, 42x42 mm 92x92 mm 68x68, 44x92, 42x42 mm 72x72, 96x96 mm
Optional RS-485/232 Communication (PCR_04) RS-485/232 Communication (PCR_05) N.A. - - With 1 Relay O/P (PSI_04)/ (PSI_03) with Analog O/P (0-10V or 4-20mA) (PSI_05) RS-485/232 Communication with Software

Note: Technical specifications are subject to change without prior information